LEWITT LCT 940 Multipattern Large Diaphragm Condenser Microphone
Large Diaphragm Condenser Microphone
Manufacturer SKU
LCT940
SKU
LWT.2225.0008
Store inventory
Online purchase
In stock
Athens 1 Store
28, Alexandras Avenue
28, Alexandras Avenue
Out of stock
Athens 2 Store
332, Siggrou Avenue
332, Siggrou Avenue
Out of stock
Thessaloniki Store
23, Filikis Eterias str.
23, Filikis Eterias str.
In stock
Patras Store
155, New National Road Athens - Patras
155, New National Road Athens - Patras
In stock
B-Stock
Out of stock
New
Price / Piece
In stock
Including tax 24%
- Acoustical operating principle pressure gradient transducer,
- externally polarized
- Transducer D25,4 mm - 1 inch
- Directional pattern omni
- broad-cardioid
- cardioid
- super-cardioid
- figure-8 and four additional intermediate pattern
- selectable on remote control
- Frequency range 20 ... 20.000 Hz
- Sensitivity 23 mV / Pa (-33 dBV), cardioid
- 20 mV / Pa (-34 dBV), omni
- 23 mV / Pa (-33 dBV), figure-8
- Signal / noise ratio (FET) 86 dB-A
- Signal / noise ratio (Tube) 82 dB-A
- Equivalent noise level (FET) 8 dB-A, cardioid (IEC 61672-1) - 9 dB-A, omni (IEC 61672-1) - 8 dB-A, figure-8 (IEC 61672-1)
- Equivalent noise level (Tube) 12 dB-A, cardioid (IEC 61672-1) - 13 dB-A, omni (IEC 61672-1) - 12 dB-A, figure-8 (IEC 61672-1)
- Dynamic range of FET mic. Amp. 135 dB-A
- Dynamic range of Tube mic. Amp. 128 dB-A
- Max. SPL for 0,5 % THD (FET) 143 dB, 0 dB pre-attenuation - 149 dB, 6 dB pre-attenuation - 155 dB, 12 dB pre-attenuation - 161 dB, 18 dB pre-attenuation
- Max. SPL for 0,5% THD (Tube) 140 dB, 0 dB pre-attenuation - 146 dB, 6 dB pre-attenuation - 152 dB, 12 dB pre-attenuation - 158 dB, 18 dB pre-attenuation
- Pre-attenuation pad 6 dB - 12 dB - 18 dB
- selectable on remote control
- Bass cut filter slope 12 dB / octave at 40 Hz - 6 dB / octave at 150 Hz - 6 dB / octave at 300 Hz
- selectable on remote control
- Rated impedance < 200 ohms
- Rated load impedance > 1.000 ohms
- Supply voltage custom power supply unit 230 V, 50 Hz - 110 V, 60 Hz
- Current consumption 170 mA
- Connector gold plated 11-pin XLR
- Cable 8 m (26 ft)
- 11-pin audio cable
- oxygen-free copper
- Dimensions (Mic) 192 x 60 x 46 mm
- Dimensions (PSU) 250 x 150 x 70 mm
- Net weight (Mic) 662 g
- Net weight (PSU) 1930 g
| Type | Studio |
|---|---|
| Best for | Vocals |
| Series | LCT |
| Polar Pattern | Multi-Pattern |
| Transducer Type | Condenser |
| Diaphragm | Large |
| Diaphragm Diameter | 25.4 mm - 1 in |
| Maximum SPL | THD (FET): 143 dBSPL, 0 dB pre-attenuation, THD (Tube): 140 dBSPL, 0 dB pre-attenuation |
| Sensitivity | (Cardioid): 23 mV/Pa, -33 dBV/Pa, (Omni): 20 mV/Pa, -34 dBV/Pa, (Figure-8): 23 mV/Pa, -33 dBV/Pa |
| Frequency Range | 20 ... 20,000 Hz |
| Dynamic Range | 135 dB (A) |
| Rated Impedance | 200 Ω |
| Rated Load Impedance | 1,000 Ω |
| Equivalent Noise Level | FET: cardioid 8dB (A), omni 9dB (A), figure-8 8dB (A), - TUBE: cardioid 12dB (A), omni 13dB (A), figure-8 12dB (A) |
| Signal / Noise Ratio | FET : 86 dB (A) - Tube: 82 dB (A) |
| Pre-Attenuation | 0 dB, -6 dB, -12 dB, -18 dB |
| Low-Cut Filter | linear, 40 Hz (12 dB/oct), 150 Hz (6 dB/oct), 300 Hz (6 dB/oct) |
| Connection | Wired (XLR) |
| Cable | Included |
| Supply Voltage | PSU:230 V, 50 Hz - Supply voltage: 110 V, 60 Hz |
| Has PSU? | Yes |
| Current Consumption | 170 mA |
| Dimensions | 192 x 60 x 46 mm - 7.5 x 2.4 x 1.8 in |
| Weight | 662 g, 23.3 oz |
From the same category
Check out these products
Other products from LEWITT
Validate your login