LEWITT LCT640TS Multipattern Large Diaphragm Condenser Microphone

SKU
LWT.2225.0006
€866.00 €1,079.00
Save €213.00 - 20%
Free shipping
  • Acoustical operating principle pressure gradient transducer,
  • externally polarized
  • Transducer D 25,4 mm - 1 inch
  • Directional pattern omni
  • broad-cardioid
  • cardioid
  • super-cardioid
  • figure-8
  • Frequency range 20 ... 20.000 Hz
  • Sensitivity 13 mV / Pa (-38 dBV), cardioid - 10 mV / Pa (-40 dBV), omni - 9 mV / Pa (-41 dBV), figure-8
  • Signal / noise ratio 84 dB-A
  • Equivalent noise level 10 dB-A, cardioid (IEC 61672-1) - 12 dB-A, omni (IEC 61672-1) - 13 dB-A, figure-8 (IEC 61672-1)
  • Dynamic range of mic. Amp. 135 dB-A
  • Max. SPL for 0,5 % THD 145 dB, 0 dB pre-attenuation - 151 dB, 6 dB pre-attenuation - 157 dB, 12 dB pre-attenuation - 163 dB, 18 dB pre-attenuation
  • Pre-attenuation pad 6 dB, 12 dB, 18 dB, switchable
  • Bass cut filter slope 12 dB / octave at 40 Hz - 6 dB / octave at 150 Hz - 6 dB / octave at 300 Hz
  • Rated impedance < 150 ohms
  • Rated load impedance > 1.000 ohms
  • Supply voltage 48 V + / - 4 V (IEC 61938)
  • Current consumption 5,5 mA (IEC 61938)
  • Connector gold plated 3-pin XLR
  • Dimensions 158 x 52 x 36 mm
  • Net weight 430 g
More Information
TypeStudio
Best forGeneral Use
SeriesLCT
Polar PatternMulti-Pattern
Transducer TypeCondenser
DiaphragmLarge
Diaphragm Diameter25.4 mm - 1 in
Maximum SPL133.8 dBSPL, 0 dB pre-attenuation
Sensitivity(Cardioid): 31.4 mV/Pa, -30.1 dBV/Pa - (Omni): 30.3 mV/Pa, -30.3 dBV/Pa - (Figure-8): 34.1 mV/Pa, -29.4 dBV/Pa
Frequency Range-
Dynamic Range123.3 dB (A)
Rated Impedance110 Ω
Rated Load Impedance1,000 Ω
Equivalent Noise Level10.5 dB (A), cardioid
Signal / Noise Ratio83.5 dB (A)
Pre-Attenuation0 dB, -6 dB, -12 dB, -18 dB
Low-Cut Filterlinear, 40 Hz (12 dB/oct), 80 Hz (12 dB/oct), 160 Hz (6 dB/oct)
ConnectionWired (XLR)
CableIncluded
Supply Voltage48 V +/- 4 V
Has PSU?No
Current Consumption5.1 mA
Dimensions158 x 52 x 36 mm - 6.22 x 2.04 x 1.42 in
Weight425 g, 14.9 oz